Share to:

LZS-003-HS LazerSafe Hydraulic Press Brake Safety System

The LZS-003-HS press brake guarding system offers a highly effective solution for both operator safety and machine productivity. The LZS-003-HS system is Category 4 compliant and meets the world’s most demanding international safety standards.

The LZS-003-HS features a laser transmitter and receiver that are mounted on the upper beam of the press. Two continuous parallel flat-band lasers provide a 40mm protective zone directly below the punch, allowing the operator to remain close to the work
Availability:
Quantity:

Specifications

Benefits

  • Ensures maximum safety without compromising productivity.

  • Allows tools to close at high speed, increasing productivity.

  • Complex shapes can be achieved in high speed with Tray/Box Mode.

  • Minimal slow speed travel in each stroke ensures maximum productivity is achieved.

  • The intelligent LCD operator control with on-screen instructions and easy to read messages makes the system simple to operate.

  • The mute point is automatically detected, easily set and continuously monitored.

  • Encoder feedback provides continuous closed loop monitoring of the speed and stopping distance of the pressing beam.

  • The laser transmitter and receiver can be quickly moved clear during tool changes, are very easily adjusted and highly tolerant to vibration.

Compare the Productivity Benefits

The LZS-003-HS dual laser system provides safe high speed closing down to just 6mm. Compared with light curtains other guarding systems the LZS-003-HS can save valuable seconds per cycle. For every 1000 cycles the LZS-003-HS system can save you over 20 minutes in operating time.

The LZS-003-HS Press Brake Guarding System is available for retrofit to most existing hydraulic press brakes. For sales and expert installation services please contact your nearest Lazer Safe Authorised Distributor or machinery dealer.

System Components

The LZS-003-HS is supplied as a complete retrofit package including Control Module, Laser TX & RX, LCD Operator Panel, Encoder Kit and mounting brackets.

Key Features

Increased Productivity
  • Allows tools to close safely at high speed, increasing productivity.

  • Minimal slow speed travel in each stroke ensures maximum productivity is achieved.

  • Complex shapes can be achieved in high speed with Tray/Box Mode.

Superior Operator Protection
  • Point of operation guarding with fast response time.

  • Dual laser protective zone protects in front, below and rear of the tool tip.

  • Tool damage protection – avoid high speed tool collision and damage that can occur when objects are left on the die.

User Friendly Operation
  • LCD Operator Panel with on-screen instructions and easy to read messages.

  • Fast and simple set-up

  • Easy and quick adjustment during tool change with quick lock linear brackets.

  • Reduces operator fatigue.

Automatic set-up and monitoring
  • Automatic mute point set-up and monitoring

  • Automatic stopping performance (overrun) monitoring

  • Automatic speed monitoring

Features

Automatic Mute Point Set-up
The 6mm mute point set-up is automatically initiated on the first cycle. The laser detects the material surface and the operator is prompted to confirm the mute point via the LCD Operator Panel. The LZS-003-HS automatically monitors the mute position and detects changes in tool size and material thickness.

LCD Operator Panel
The intelligent LCD operator control with on-screen instructions and easy to read messages makes the system simple to operate. A magnetic backing allows the panel to be easily moved on the front of the machine.

Laser Transmitter (TX)
The TX emits a CLASS 1 dual laser below the punch and provides a protective zone in front, below and rear of the tool tip. As the tools close in high speed the lasers are progressively muted while machine deceleration and speed is monitored. The system provides optical protection until the tool opening is 6mm and travel is reduced to bending speed. This allows for maximum high speed travel for faster cycle times and increased productivity.

Advanced Monitoring functions
Encoder feedback provides continuous closed loop automatic monitoring of the speed and stopping distance (overrun) of the pressing beam.

Close Proximity Operation
The LZS-003-HS enables the operator unrestricted access to the tooling area. The operator can hold the work piece as close as 20mm from the tool area and operate the machine safely in high speed. This increases productivity and reduces operator fatigue – no more stepping in and out of the tool area as with traditional light curtains.

Adjustable Linear BracketsThe TX and RX can be quickly moved and locked clear during tool change, are very easily adjusted and highly tolerant to machine vibration.

Laser Receiver (RX)
The RX features a wide reception zone to eliminate the need for precise manual adjustment after tool change and is also highly tolerant to machine vibration.

Approvals


CE

cULus


Previous: 
Next: 
Contacts
Tel:+8618955523309
WhatsApp:+8618955523309
Address: Mingjue Industrial Park, Lishui,                Nanjing, Jiangsu, China
     Email: xujason82@gmail.com 
Social Websites
© Copyright Nanjing Tuojia Precision Machinery Parts Com., Ltd. All Rights Reserved.